ct10 series encapsulated molded switch tel: (401) 943.2686 | fax: (401) 942.0920 96 | page ct10 series fe ct10 is an encapsulated molded dry reed switch. it is single-pole, single throw (spst) type, having normally open ruthenium contacts. fe sensor is a double-ended type and may be actuated with an electromagnet, a per - manent magnet or a combination of both. fe device is designed for smd mounting and is available in three lead confgura - tions. * new ct10-g2 now 260 o c process temperature hardy. ct10 series features u ideal for smd pick and place u tape and reel packaging u 10w rating u rugged encapsulation u excellent life and reliability u rohs compliant u proximity sensing u security alarm sensor u level sensor u flow sensor u pulse counter applications model number ct10-xxxx-yy parameters units operating characteristics operate range at 10-40 release range at 3-35 electrical characteristics switched power (max) w 10 switched voltage dc (max) v 200 switched voltage ac, rms value (max) v 140 switched current dc (max) ma 500 switched current ac, rms value (max) ma 500 carry current dc (max) a 0.5 breakdown voltage (min) v 230 contact resistance (initial max) m 200 insulation resistance (min) m 10 6 environmental ratings storage temperature oc -40 to + 125 operating temperature oc -40 to + 125 vibration temperature g 10 shock resistance g 100 u at values measured using a philips 10jk coil. u surface mount component processing temperature model g1 & g2: 500f(260c) max for 1 minute dwell time; model g4 & a2: 439f(226c) max for 1 minute dwell time. u temperature measured on leads where lead exits molded package. notes ne w ! ct10-g2
coto technology, inc. for most recent data visit www.cotorelay.com page | 97 ordering information a complete part number is represented by the digits to the right of the ct10 series prefx followed by a sufx as shown below. example: ct10-1030-g1 is a ct10 sensor (10mm encapsulated switch) with a sensitivity range from 10 to 30at lead ends are formed according to the g1 version dimensions in inches (millimeters) ct10-xxxx-g1 ct10-xxxx-g2 ct10-xxxx-a2 ct10-xxxx-g4 .505 (12.8mm) .77 (19.6mm) .035/.045 (.089/1.14mm) .115 (2.92mm) .006 (0.15mm) .095 (2.41mm) .040 (1.0mm) .505 (12.8mm) .77 (19.6mm) .035/.045 (.089/1.14mm) .115 (2.92mm) .006 (0.15mm) .095 (2.41mm) .040 (1.0mm) .505 (12.8mm) .645 (16.4mm) .035/.045 (.089/1.14mm) .115 (2.92mm) .006 (0.15mm) .095 (2.41mm) .040 (1.0mm) .619 (15.72mm) .505 (12.8mm) .115 (2.92mm) .095 (2.41mm) .040 (1.0mm) ct10-xxxx-yy series ct10 lead con?guration subset: g1 for gull wing version 1 (16.4mm) g2/g4 for gull wing version 2 (19.6mm) a2 for axial at range (measured after mold & lead form) 10-30; 10-40
|